Sub Sea Piping
img
img

SUB SEA PIPING

We are the leading fastener and component suppliers for Sub Sea Piping. We have wide range of products as per requirements.

The Low alloy steel with effective corrosion protection properties is the best choice of sub sea piping & ASTM A320 L7 and ASTM A320 L7M for fasteners manufacturing for subsea piping joints.

Stud bolt for subsea piping

Stud bolts are threaded bolts used in Chemical, Oil and Petrochemical Industries for high pressure flange connections. Flanges are fastened together with the help of stud bolts and nuts. The nuts used in the tightening of flanges are generally of hexagon or heavy hexagon type depending upon the pressure and other piping system requirements. Flange connections are also fastened with traditional solutions like Hex Bolts. Hex bolts are very similar to stud bolts in terms of threading but have a forged hexagon head. However stud bolts are preferred over hex Bolt because during tightening and toque application, studs do not twist.

ASME B16.5 is primarily the dimensional standard for ASTM Stud bolts. This defines the Dimensional requirement i.e. length and the diameter of stud Bolt to be used for the tightening of flanges. Whereas ASME B1.1 defines the threading requirements. Most commonly used thread form is the symmetrical V profile thread with 60 degree angle. ASTM standards define every specific criteria starting from Material grade, Heat treatment, Mechanical & Chemical properties, Stamping, Inspection, acceptance and rejection requirements. The most common grade that we work with is ASTM A 193.

We actively manufacture the following grade of stud bolts:

S.No.

Specification

Standerd

Grade name

Diameter

1

Stud Bolts

ASTM A193

B7, B7M, B16, B8, B8M, B8T

1/2” to 3”, M-16 to M-76

2

Stud Bolts

ASTM A320

L7, L7M, L43

1/2” to 3”, M-16 to M-76

2

Stud Bolts

ISO 898-1

8.8, 10.9, 12.9

1/2” to 3”, M-16 to M-76

2

Stud Bolts

ISO 3506-1

A2-50, A2-70, A2-80, SS304, SS316, SS316 S31

1/2” to 3”, M-16 to M-76

2

Heavy Hex Nuts

ASTM A194, ASTM A563, A320

2, 2H, 2HM, 4, 7, 7M, 7L, 8, 8M, A, B, C, DH

1/2” to 3”, M-16 to M-76

3

Hex Nuts

ASTM A194, ASTM A563, A320

2, 2H, 2HM, 4, 7, 7M, 7L, 8, 8M, A, B, C, DH

1/2” to 3”, M-16 to M-76

4

Washer

ASTM F436

Type 1 & 2

1/2” to 3”, M-16 to M-76

ASTM A193 Gr B7

"ASTM A193 Gr B7 stud Bolt are manufactured from chromium molybdenum ferritic alloy". (“Stud Bolts India - ASTM A193 B7, B16 - INDANA STEEL”) B7 stud bolt have a standard temperature range of minus 29 degree Celsius to 427 degree Celsius and are used in flanges of standard ASTM A105. Recommended nuts for b7 stud bolts are grade 2H Hex nuts.

GRADE B7 stud bolts are generally supplied in finishes such as Plain, Blackening, Zinc plated(Electroplated), Cadmium(Yellow), Teflon coating(blue), HDG etc. according to the nature of application and environment.

ASTM A193 B16 Stud Bolts

"Grade B16 stud bolt are used in high temperature & high pressure environment." (“ASTM A193 STUD BOLTS - savoypipinginc.com”) These Stud Bolts are very similar to Grade B7 Stud bolts but the alloy contains an additional element called Vanadium. Vanadium brings to the alloy high strength and heat resistance which is very critical to Grade B16 as these are used in very high temperature environment. Grade B16 stud bolts can with stand temperatures up to 537 degree Celsius. Recommended Hex nuts for ASTM A193 B16 stud bolt are Grade 4 or Grade 7 nuts. Grade 4 nuts are slowly being substituted with Grade 7 nuts. Grade 7 nuts have chromium in it which gives it high strength and increases its corrosion resistance. Grade B16 stud bolts are generally used with ASTM A283 or GrF11,F22 flanges.

SS STUD BOLTS

We manufacture stainless steel ss 304, ss 316, ss316l, ss316 s31 stud bolts in India. Stainless steel ss stud bolts are used in various industries in India. Ss stud bolts are generally corrosion free & are available in various length & sizes.

Threaded Rods

Threaded rods are used as a fastener & also for various industrial applications. Threaded rods are made from various material like MS threaded rod, ss threaded rod, GI threaded rods, high tensile threaded rods. Threaded rods are available in various sizes & different length. We also offer various coating on our threaded rods like PTFE, Xylan etc.

Custom bolts & studs for the subsea piping

Sub See industry needs fasteners it can use in flange joint connection during piping installation in sea, and under other conditions that demand high-quality Fasteners.

  • We are your one-stop source for non-standard fasteners cut to length and threaded to your exact application specifications. Our extensive inventory includes blanks in many grades of steel. We carry Stud Bolts up to 4" / M100 in diameter and 48" long, as well as Heavy Hex Nuts up to 4" / M100 in diameter.
  • We can make fasteners as per your requirements with our in house hot forging capacity of M100 bolts with high precision CNC machining.

At Roll-fast , we have a wide range of fasteners which are suitable for this very need. As a leading supplier of Hex Bolt, Full thread stud bolt, double end stud bolts and hex nuts, our fasteners conform to the strictest ANSI, ASME, BS, European, IS and ISO standards for ideal use in the harsh environments of the Sub Sea.

img
img
img
img
img